Product Details Portlet

G6J-Y Surface-mounting Relay

Ultra-compact and Slim DPDT Relay

  • Suitable for high-density mounting.(5.7 mm (W) × 10.6 mm (L) ×9 mm (H)).
  • Dielectric strength of 1,500 VAC and an impulse withstand voltage of 2,500 V for 2 × 10 νs (conforms to Telcordia specifications(formerly Bellcore)).
  • Conforms to FCC Part 68 (1,500 V, 10 × 160 νs).
  • Single-winding latching models to save energy.
  • Standard models conforms to UL/C-UL standards.
RoHS適合
本ページは製品カタログからの抜粋した情報を記載しています。その他の製品情報はデータシート他各種データをご覧ください。
Absolute Maximum Ratings (Ta = 25ºC)
Packing



Relay Function Protective
Structure
Contact form
Tube Packing Tape Packing
Model Rated coil
voltage
Minimun
packing unit
Model Rated coil
voltage
Minimun
packing unit
Minimum
ordering unit
(tape packing)
Single-side
stable
Fully
sealed
DPDT
(2c)
G6J-2P-Y 3 VDC 50 pcs/
tube
3 VDC 400 pcs/
reel
800 pcs/
2 reels
4.5 VDC 4.5 VDC
5 VDC 5 VDC
12 VDC 12 VDC
24 VDC 24 VDC
G6J-2FS-Y
G6J-2FL-Y
3 VDC G6J-2FS-Y-TR
G6J-2FL-Y-TR
3 VDC
4.5 VDC 4.5 VDC
5 VDC 5 VDC
12 VDC 12 VDC
24 VDC 24 VDC
Single-winding
latching
G6JU-2P-Y 3 VDC 3 VDC
4.5 VDC 4.5 VDC
5 VDC 5 VDC
12 VDC 12 VDC
24 VDC 24 VDC
G6JU-2FS-Y
G6JU-2FL-Y
3 VDC G6JU-2FS-Y-TR
G6JU-2FL-Y-TR
3 VDC
4.5 VDC 4.5 VDC
5 VDC 5 VDC
12 VDC 12 VDC
Note: 1. When ordering, add the rated coil voltage to the model number.
  2. When ordering tape packing, add "-TR" to the model number.

Be sure since "-TR" is not part of the relay model number, it is not marked on the relay case.

Tube Packing and Tape Packing
1. Tube Packing
Relays in tube packing are arranged so that the orientation mark of each Relay is on the left side.
Always confirm that the Relays are in the correct orientation when mounting the Relays to the PCBs.
G6J-Y:Ordering Information1
Tube length: 555 mm (stopper not included)
No. of Relays per tube: 50 pcs/span>

2. Tape Packing (Surface-mounting Terminal Relays)
When ordering Relays in tape packing, add the prefix "-TR" to the model number, otherwise the Relays in stick packing will be provided.
Relays per reel: 400 pcs
Minimum ordering unit: 2 reels (800 pcs)

Direction of Relay Insertion
G6J-Y:Ordering Information2

Reel Dimensions
G6J-Y:Ordering Information3

Carrier Tape Dimensions
G6J-2FS-Y, G6JU-2FS-Y, G6J-2FL-Y, G6JU-2FL-Y


Coil Ratings
Single-side Stable Relays (G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y)
Item Rated voltage
3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC
Rated current 48.0 mA 32.6 mA 28.9 mA 12.3 mA 9.2 mA
Coil resistance 62.5 Ω 137.9 Ω 173.1 Ω 976.8 Ω 2,600.5 Ω
Must operate voltage 75% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage 150% of rated voltage
Power consumption Approx. 140 mW Approx. 230 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
  2. The operating characteristics are measured at a coil temperature of 23ºC.
  3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.

Single-winding Latching Relays (G6JU-2P-Y, G6JU-2FS-Y, G6JU-2FL-Y)
Item Rated voltage
3 VDC 4.5 VDC 5 VDC 12 VDC
Rated current 33.7 mA 22.0 mA 20.4 mA 9.0 mA
Coil resistance 89.0 Ω 204.3 Ω 245.5 Ω 1,329.2 Ω
Must set voltage 75% max. of rated voltage
Must release voltage 75% max. of rated voltage
Max. voltage 150% of rated voltage
Power consumption Approx. 100 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
  2. The operating characteristics are measured at a coil temperature of 23ºC.
  3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.

Contact Ratings
Item Load
Resistive load
Contact type Bifurcated crossbar
Contact material Ag (Au-Alloy)
Rated load 0.3 A at 125 VAC, 1 A at 30 VDC
Rated carry current 1A
Max. switching voltage 125 VAC, 110 VDC
Max. switching current 1A

Characteristics
Classification



Item Model
Single-side Stable Relays Single-winding Latching Relays
G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y G6JU-2P-Y, G6JU-2FS-Y, G6JU-2FL-Y
Contact resistance *1 100 mΩ max.
Operating (set) time 3 ms max.
Release (reset) time 3 ms max.
Minimum set/reset pulse width --- 10 ms
Insulation resistance *2 1,000 MΩ min. (at 500 VDC)
Dielectric strength Between coil and contacts 1,500 VAC, 50/60 Hz for 1 min
Between contacts of different polarity 1,000 VAC, 50/60 Hz for 1 min
Between contacts of the same polarity 750 VAC, 50/60 Hz for 1 min
Impulse withstand voltage Between coil and contacts 2,500 VAC, 2 x 10 µs
Between contacts of different polarity 1,500 VAC, 10 x 160 µs
Between contacts of the same polarity
Vibration resistance Destruction 10 to 55 to 10 Hz 2.5 mm single amplitude (5 mm double amplitude)
Malfunction 10 to 55 to 10 Hz 1.65 mm single amplitude (3.3 mm double amplitude)
Shock resistance Destruction 1,000 m/s2
Malfunction 750 m/s2
Durability Mechanical 50,000,000 operations min. (at 36,000 operations/hour)
Electrical 100,000 operations min. (with a rated load at 1,800 operations/hour)
Failure rate (P level) (reference value) *3 10 µA at 10 mVDC
Ambient operating temperature -40 to 85ºC (with no icing or condensation)
Ambient operating humidity 5% to 85%
Weight Approx. 1.0 g
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
  2. The insulation resistance was measured with a 500 VDC Megger Tester applied to the same parts as those for checking the dielectric strength.
  3. This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the operating frequency, operating conditions, expected reliability level of the relay, etc. Always double-check relay suitability under actual load conditions.
PCB Terminals
G6J-2P-Y, G6JU-2P-Y


G6J-Y:Dimensions7
PCB Mounting Holes
(Bottom VIEW)
Tolerance:±0.1mm

G6J-Y:Dimensions2
Terminal Arrangement/Internal Connections
(Bottom VIEW)
G6J-Y:Dimensions3
Note:Check carefully the coil polarity of the Relay.
Surface-mounting Terminals (Short)
G6J-2FS-Y, G6JU-2FS-Y

G6J-Y:Dimensions7
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions
(TOP VIEW)
Tolerance:±0.1mm

G6J-Y:Dimensions5
Terminal Arrangement/Internal Connections
(TOP VIEW)
G6J-Y:Dimensions6
Note:Check carefully the coil polarity of the Relay.
Surface-mounting Terminals (Long)
G6J-2FL-Y, G6JU-2FL-Y

G6J-Y:Dimensions7
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions
(TOP VIEW)
Tolerance:±0.1mm

G6J-Y:Dimensions8
Terminal Arrangement/Internal Connections
(TOP VIEW)
G6J-Y:Dimensions9
Note:Check carefully the coil polarity of the Relay.

Correct Use

●Long Term Current Carrying

Under a long-term current carrying without switching, the insulation resistance of the coil goes down gradually due to the heat generated by the coil itself. Furthermore, the contact resistance of the Relay will gradually become unstable due to the generation of film on the contact surfaces. A Latching Relay can be used to prevent these problems. When using a single-side stable relay, the design of the fail-safe circuit provides protection against contact failure and open coils.

●Handling of Surface-mounting Relays

·Use the Relay as soon as possible after opening the moisture- proof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape.
·When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40℃. Do not put the relay in a cold cleaning bath immediately after soldering.

●Claw Securing Force During Automatic Insertion

During automatic insertion of Relays, make sure to set the securing force of the claws to the following values so that the Relay characteristics will be maintained.

●Environmental Conditions During Operation, Storage, and Transportation

Protect the Relays from direct sunlight and keep the Relays under normal temperature, humidity, and pressure.

●Mounting Latching Relays

Make sure that the vibration or shock that is generated from other devices, such as Relays in operation, on the same panel and imposed on the Latching Relays does not exceed the rated value, otherwise the Latching Relays that have been set may be reset or vice versa. The Latching Relays are reset before shipping. If excessive vibration or shock is imposed, however, the Latching Relays may be set accidentally. Be sure to apply a reset signal before use.

●Maximum Allowable Voltage

The maximum voltage of the coil can be obtained from the coil temperature increase and the heat-resisting temperature of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maximum voltage also involves important restrictions which include the following:
Must not cause thermal changes or deterioration of the insulating material.
Must not cause damage to other control devices.
Must not cause any harmful effect on people.
Must not cause fire.
Therefore, be sure not to exceed the maximum voltage specified in the catalog.
As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however, can be applied to the coil provided that the voltage is less than the maximum voltage. It must be noted that continuous voltage application to the coil will cause a coil temperature increase thus affecting characteristics such as electrical life and resulting in the deterioration of coil insulation.

●Coating

Relays mounted on PCBs may be coated or washed. Do not apply silicone coating or detergent containing silicone, otherwise the silicone coating or detergent may remain on the surface of the Relays.

●Other Handling

Please don't use the relay if it suffered the dropping shock. Because there is a possibility of something damage for initial performance.