Product Details Portlet

G6DN PCB Power Relays

SPST Slim Power Relay for 5 A switching

  • Slim 5-mm width and miniature size. (20 × 5.08 × 12.5 mm)
  • High switching capability 5 A (250 VAC and 30 VDC), and high contact reliability by crossbar-twin contact.
  • Low power consumption 110 mW.
  • Meets application standards EN61010-1 and EN61010-2-201 for reinforced insulation (CTI 600 V min. and Rated insulation voltage 300 V).
  • Actualize electrical durability 100 Kops (-L type)

Ordering Information

ClassificationContact formEnclosure ratingTerminal shapeModelMinimum packing unit
StandardSPST-NO (1a)Fully sealedPCB terminalsG6DN-1A25 pcs/ tube
High durabilityG6DN-1A-L
When ordering, add the rated coil voltage to the model number.
[Example] G6DN-1A DC5 ... Rated coil voltage
However, the notation of the coil voltage on the product case as well as on the packaging will be marked as □□ VDC.
[Example] G6DN-1A 5VDC

Coil Ratings

ClassificationRated voltageRated current
Coil resistance
Must operate voltage (V)Must release voltage (V)Max. voltage (V)Power consumption
% of rated voltage
Standard4.5 VDC24.418470% max. *5% min.160%Approx. 110
5 VDC22.0227
12 VDC9.21,309
24 VDC4.65,236
High durability5 VDC36.0139Approx. 180
12 VDC15.0800
24 VDC7.53,200
The rated current and resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
Operating voltage is less than 72% when the relay is sideways and the marking is right way.

Contact Ratings

Resistive loadInductive load (cos φ = 0.4, L/R = 7 ms)
Contact TypeCross bar twin
Contact materialAg-Alloy and Au plating *
Rated load5 A at 250 VAC
5 A at 30 VDC
2 A at 250 VAC
2 A at 30 VDC
Rated carry current5 A
Max. switching voltage277 VAC, 125 VDC
Max. switching current5 A
Au plating is applied to stationary contact.


StandardHigh durability
Contact resistance100 mΩ max.
Operate time10 ms max.
Release time5 ms max.
Insulation resistance1,000 MΩ min. (at 500 VDC)
Dielectric strengthBetween coil and contacts3,000 VAC, 50/60 Hz for 1 min
Between contacts of the same polarity750 VAC, 50/60 Hz for 1 min
Surge withstand voltageBetween coil and contacts6 kV (1.2 x 50 μs)
Vibration resistanceDestruction10 to 55 to 10 Hz, 2.5 mm single amplitude (5.0 mm double amplitude)
Malfunction10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistanceDestruction1,000 m/s2
Malfunction100 m/s2
DurabilityMechanical20,000,000 operations min. (at 18,000 operations/hr)
Electrical100,000 operations min.
(3 A at 250 VAC, 3 A at 30 VDC Resistive load)
80,000 operations min.
(5 A at 250 VAC, 5 A at 30 VDC Resistive load)
100,000 operations min.
(2 A at 250 VAC, 2 A at 30 VDC Inductive load)
100,000 operations min.
(5 A at 250 VAC, Resistive load)
100,000 operations min.
(5 A at 30 VDC, Resistive load)
200,000 operations min.
(2 A at 250 VAC, Inductive load)
200,000 operations min.
(2 A at 30 VDC, Inductive load)
Ambient temperatureOperating-40ºC to +90ºC (with no icing or condensation)
Humidity5% RH to 95% RH
WeightApprox. 3 g
1. Values in the above table are initial values.
2. The contact resistance is measured with 1 A applied at 5 VDC using a fall-of-potential method.
3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC.
This value was measured at a switching frequency of 120 operations/min.



Fully Sealed Model

Average value
PCB Mounting Holes
Terminal Arrangement /
Internal Connections

Note: * No coil polarity