ページ印刷G5RL PCB Power Relay - OMRON - Americas
Product Details Portlet
G5RL PCB Power Relay
Low-profile Relay with Various Models
- Low profile: 15.7 mm in height.
- Creepage distance 8mm between coil and contacts
- 10 kV Impulse withstand voltage
- Models with AC coil available.
- High-Inrush model available (Inrush peak currents up to 100 A)
- Low Noise models available (Approx. 10 to 20 dB less sound pressure than standard G5RL-Series Relays)
- TV8 Rating models available (TV8 for UL standard)
RoHS適合
Datasheet
本ページは製品カタログからの抜粋した情報を記載しています。その他の製品情報はデータシート他各種データをご覧ください。
| Classification | Terminal Shape | Contact form | Enclosure rating | Model | Rated coil voltage | Minimum packing unit |
|---|---|---|---|---|---|---|
| Standard | PCB terminals | SPST-NO (1a) | Flux protection | G5RL-1A-LN | 5VDC, 12VDC, 24VDC | 100 pcs/tray |
| G5RL-1A-TV8 | 5VDC, 12VDC, 24VDC, 48VDC | |||||
| High-capacity | G5RL-1A-E-HR | 5VDC, 12VDC, 24VDC, 48VDC | ||||
| G5RL-1A-E-LN | 5VDC, 12VDC, 24VDC | |||||
| G5RL-1A-E-TV8 | 5VDC, 12VDC, 24VDC, 48VDC | |||||
| SPDT (1c) | G5RL-1-E | 24VAC, 100VAC, 115VAC/120VAC, 200VAC, 230VAC/240VAC |
||||
| G5RL-1-E-HR | 5VDC, 12VDC, 24VDC, 48VDC |
| Example: G5RL-1A-LN |
Coil
Low Noise Models: G5RL-1A(-E)-LN
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
Models with AC Coil: G5RL-1-E
Contacts
Low Noise Models: G5RL-1A(-E)-LN
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
Models with AC Coil: G5RL-1-E
Characteristics
Low Noise Models: G5RL-1A(-E)-LN
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
Models with AC Coil: G5RL-1-E
Low Noise Models: G5RL-1A(-E)-LN
|
(VDC) |
Rated current (mA) |
Coil resistance (Ω) |
Must operate voltage (V) |
Must release voltage (V) |
Max voltage (V) |
Power consumption (mW) |
|---|---|---|---|---|---|---|
| % of rated voltage | ||||||
| 5 | 106.0 | 47.2 | 70% max. of rated voltage | 10% min. of rated voltage | 110% | Approx. 530 |
| 12 | 44.2 | 272 | ||||
| 24 | 22.1 | 1,086 | ||||
| Note | 1. | The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. |
| 2. | Be sure to use a diode for surge absorption for the coil. | |
| 3. | The operating characteristics are measured at a coil temperature of 23°C. | |
| 4. | The "Max. voltage" is the maximum voltage that can be applied to the relay coil. |
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
|
(VDC) |
Rated current (mA) |
Coil resistance (Ω) |
Must operate voltage (V) |
Must release voltage (V) |
Max voltage (V) |
Power consumption (mW) |
|---|---|---|---|---|---|---|
| % of rated voltage | ||||||
| 5 | 80 | 62.5 | 70% max. | 10% min. | 130% | Approx. 400 |
| 12 | 33.3 | 360 | ||||
| 24 | 16.7 | 1,440 | ||||
| 48 | 8.96 | 5,358 | Approx. 430 | |||
| Note | 1. | The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. |
| 2. | The operating characteristics are measured at a coil temperature of 23°C. | |
| 3. | The "Max. voltage" is the maximum voltage that can be applied to the relay coil. |
Models with AC Coil: G5RL-1-E
|
(VAC) |
Rated current at 50Hz (mA) |
Rated current at 60Hz (mA) |
Coil resistance (Ω) |
Must operate voltage (V) |
Must release voltage (V) |
Max voltage (V) |
Power consumption (mW) |
|---|---|---|---|---|---|---|---|
| % of rated voltage | |||||||
| 24 | 31.3 | 28.3 | 443 | 70% max. | 15% min. | 110% | Approx. 750 |
| 100 | 7.5 | 6.88 | 8,220 | ||||
| 115/120 | 5.85/6.25 | 5.35/5.70 | 11,600 | ||||
| 200 | 3.75 | 3.45 | 33,000 | ||||
| 230/240 | 3.00/3.13 | 2.76/2.88 | 47,600 | ||||
| Note | 1. | The rated current tolerance is +15%/-20%. |
| 2. | The operating characteristics are measured at a coil temperature of 23°C. | |
| 3. | Coil resistances are provided as reference values. | |
| 4. | The "Max. voltage" is the maximum voltage that can be applied to the relay coil. |
Contacts
Low Noise Models: G5RL-1A(-E)-LN
|
|
Resistive load | |
|---|---|---|
| Standard | High-capacity | |
| Contact form | SPST-NO (1a) | |
| Contact Type | Single | |
| Contact material | Ag Alloy | |
| Rated load | 12 A at 250 VAC 12 A at 24 VDC |
16 A at 250 VAC 16 A at 24 VDC |
| Rated carry current | 12A | 16A |
| Max. switching voltage | 250 VAC, 24 VDC | |
| Max. switching current | 12A | 16A |
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
|
|
Resistive load | ||
|---|---|---|---|
| Standard | High-capacity | ||
| Contact form | SPST-NO (1a) | SPST-NO (1a) | SPDT (1c) |
| Contact Type | Single | ||
| Contact material | Ag Alloy | ||
| Rated load | 12 A at 250 VAC 12 A at 24 VDC |
16 A at 250 VAC 16 A at 24 VDC |
16 A at 250 VAC, 24VDC (NO) 5 A at 250 VAC, 24 VDC (NC) |
| Rated carry current | 12 A | 16 A | 16 A (NO), 5 A (NC) |
| Max. switching voltage | 250 VAC, 24 VDC | ||
| Max. switching current | 12A | 16A | 16 A (NO), 5 A (NC) |
Models with AC Coil: G5RL-1-E
|
|
Resistive load |
|---|---|
| High-capacity | |
| Contact form | SPDT (1c) |
| Contact Type | Single |
| Contact material | Ag Alloy |
| Rated load | 16 A at 250 VAC, 24 VDC (NO) 5 A at 250 VAC, 24 VDC (NC) |
| Rated carry current | 16 A (NO), 5 A (NC) |
| Max. switching voltage | 250 VAC, 24 VDC |
| Max. switching current | 16 A (NO), 5 A (NC) |
Characteristics
Low Noise Models: G5RL-1A(-E)-LN
|
Standard | High-capacity | |||
|---|---|---|---|---|---|
| Contact resistance | 100 mΩ max. | ||||
| Operate time | 15 ms max. | ||||
| Release time | 15 ms max. | ||||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | ||||
| Dielectric strength | Between coil and contacts |
6,000 VAC, 50/60 Hz for 1 min | |||
| Between contacts of the same polarity |
1,000 VAC, 50/60 Hz for 1 min | ||||
| Impulse withstand voltage |
Between coil and contacts |
10 kV (1.2 × 50 νs) | |||
| Vilration sesistanse | Destruction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | |||
| Malfunction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | ||||
| Shock resistance | Destruction | 1,000m/s2 | |||
| Malfunction | 100m/s2 | ||||
| Durability | Mechanical | 1,000,000 operation min. (at 18,000 operations/hr) | |||
| Electrical | 100,000 operations min. (at 1,800 operations/hr) | 50,000 operations min. (at 1,800 operations/hr) | |||
| Failure rate (P level) (reference) | 100 mA at 5 VDC | ||||
| Ambient operating temperature | -40° to 85°C (with no icing or condensation) | ||||
| Ambient operating humidity | 5% to 85% | ||||
| Weight | Approx. 10 g | ||||
| Note | 1. Values in the above table are initial values. 2. The contact resistance is measured with 1 A applied at 5 VDC using a fall-of-potential method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC. 4. The release time is value with a diode attached. 5. Failure rate (P level) was measured at a switching frequency of 120 operations/min. |
High-Inrush Models: G5RL-1(A)-E-HR, G5RL-1A(-E)-TV8
|
Standard | High-capacity | |||
|---|---|---|---|---|---|
| Contact resistance | 100 mΩ max. | ||||
| Operate time | 15 ms max. | ||||
| Release time | 5 ms max. | ||||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | ||||
| Dielectric strength | Between coil and contacts |
6,000 VAC, 50/60 Hz for 1 min | |||
| Between contacts of the same polarity |
1,000 VAC, 50/60 Hz for 1 min | ||||
| Impulse withstand voltage |
Between coil and contacts |
10 kV (1.2 × 50 νs) | |||
| Vilration sesistanse | Destruction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | |||
| Malfunction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | ||||
| Shock resistance | Destruction | 1,000m/s2 | |||
| Malfunction | 100m/s2 | ||||
| Durability | Mechanical | 10,000,000 operation min. (at 18,000 operations/hr) | |||
| Electrical | 100,000 operations min. (at 1,800 operations/hr) | 50,000 operations min. (at 1,800 operations/hr) | |||
| Failure rate (P level) (reference) | 100 mA at 5 VDC | ||||
| Ambient operating temperature | -40° to 85°C (with no icing or condensation) | ||||
| Ambient operating humidity | 5% to 85% | ||||
| Weight | Approx. 10 g | ||||
| Note | 1. Values in the above table are initial values. 2. The contact resistance is measured with 1 A applied at 5 VDC using voltage drop method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC. 4. The resistive load ratings for NO contact apply when there is no load on NC contact. 5. Failure rate (P level) was measured at a switching frequency of 120 operations/min. |
Models with AC Coil: G5RL-1-E
|
High-capacity | |||
|---|---|---|---|---|
| Contact resistance | 100 mΩ max. | |||
| Operate time | 20 ms max. | |||
| Release time | 10 ms max. | |||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | |||
| Dielectric strength | Between coil and contacts |
6,000 VAC, 50/60 Hz for 1 min | ||
| Between contacts of the same polarity |
1,000 VAC, 50/60 Hz for 1 min | |||
| Impulse withstand voltage |
Between coil and contacts |
10 kV (1.2 × 50 νs) | ||
| Vilration sesistanse | Destruction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | ||
| Malfunction | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) | |||
| Shock resistance | Destruction | 1,000m/s2 | ||
| Malfunction | 100m/s2 | |||
| Durability | Mechanical | 10,000,000 operation min. (at 18,000 operations/hr) | ||
| Electrical | 50,000 operations min. (at 720 operations/hr) | |||
| Failure rate (P level) (reference) | 40 mA at 24 VDC | |||
| Ambient operating temperature | -40° to 85°C (with no icing or condensation) | |||
| Ambient operating humidity | 5% to 85% | |||
| Weight | Approx. 10 g | |||
| Note | 1. Values in the above table are initial values. 2. The contact resistance is measured with 1 A applied at 5 VDC using voltage drop method. 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC. 4. The resistive load ratings for NO contact apply when there is no load on NC contact. 5. Failure rate (P level) was measured at a switching frequency of 120 operations/min. |
| (Unit: mm) G5RL-1A-LN G5RL-1A-TV8 |
|
| PCB Mounting Holes(BOTTOM VIEW) |
Terminal Arrangement/Internal Connections (BOTTOM VIEW) (No coil polarity) |
G5RL-1A-E-LN |
|
| PCB Mounting Holes(BOTTOM VIEW) |
Terminal Arrangement/Internal Connections (BOTTOM VIEW) (No coil polarity) |
G5RL-1-E |
|
| PCB Mounting Holes(BOTTOM VIEW) |
Terminal Arrangement/Internal Connections (BOTTOM VIEW)  (No coil polarity) |
Correct Use
●Mounting
●When mounting a G5RL-LN Relay (Silent Relay) on a PCB, use a diode for surge absorption for the coil.
●Wiring of High-capacity Models (-E)
●High-capacity models (-E) have a structure that connects two terminals from one contact. When designing the circuit, use both terminals. If you use only one terminal, the Relay may be unable to satisfy specified performance.
●Others
●Do not decrease coil voltage after operation and do not use a pulse wave drive.
●Precautions for Correct Use
●This product is not suitable for vehicles such as automobiles (including two-wheeled vehicles).
●If the product is used in the following applications, consult your OMRON sales representative to check the necessary items according to the specification sheets.Also make sure the product is used within the specified ratings and performance ranges with an ample margin and implement safety measures, such as designing a safety circuit, to minimize danger should the product fail. a. Outdoor use, uses involving potential chemical contamination or electrical interference. b. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, safety equipment, and equipment that could present a risk to human life or body. c. Equipment requiring a high level of reliability, such as gas, water, or electrical supply systems.
