Product Details Portlet
This announcement is based on product catalogue information previously shown before its discontinuation Product information of the existing product may be different from the previous version

EE-SX1107 Photomicrosensor (Transmissive)

  • Ultra-compact with a 3.4-mm-wide sensor and a 1-mm-wide slot.
  • PCB surface mounting type.
  • High resolution with a 0.15-mm-wide aperture.

Discontinuation Date: Mar. 31, 2018

Recommended replacement EE-SX1320

RoHS Compliant
Note: This web page provides an excerpt from a datasheet. Refer to Product Datasheet and other applicable documents for more information.
Absolute Maximum Ratings (Ta = 25ºC)
Rated value
Emitter Forward current IF 25mA (see note 1)
Pulse forward current IFP 100mA (see note 2)
Reverse voltage VR 5V
Detector Collector-Emitter voltage VCEO 20V
Emitter-Collector voltage VECO 5V
Collector current IC 20mA
Collector dissipation PC 75mW (see note 1)
Ambient temperature Operating Topr -30ºC to 85ºC
Storage Tstg -40ºC to 90ºC
Reflow soldering Tsol 255ºC (see note 3)
Manual soldering Tsol 350ºC (see note 3)
Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25ºC.

2. Duty: 1/100; Pulse width: 0.1 ms

3. Complete soldering within 10 seconds for reflow soldering and within 3 seconds for manual soldering.

Electrical and Optical Characteristics (Ta = 25ºC)
Emitter Forward voltage VF 1.1 V typ.,
1.3 V max.
IF = 5mA
Reverse current IR 10 µA max. VR = 5V
Peak emission wavelength λP 940 nm typ. IF = 20mA
Detector Light current IL 50 µA min.,
150 µA typ.,
500 µA max.
IF = 5mA,
VCE = 5V
Dark current ID 100 nA max. VCE = 10V,
Leakage current ILEAK --- ---
saturated voltage
VCE (sat) 0.1 V typ.,
0.4 V max.
IF = 20mA,
IL = 50µA
Peak spectral
sensitivity wavelength
λP 900 nm typ. ---
Rising time tr 10 µs typ. VCC = 5V,
RL = 1k Ω,
IL = 100µA
Falling time tf 10 µs typ. VCC = 5V,
RL = 1k Ω,
IL = 100µA
Note: All units are in millimeters unless otherwise indicated.


Terminal No.
A Anode
K Cathode
C Collector
E Emitter
Unless otherwise specified, the tolerances are ± 0.15 mm.